Guide Sensor

Guide Sensor, LA01,LE01 is a reflection type optical guide sensor using 16 IR sensors. This product is equipped with components and circuits to improve the service life of the sensor, and also is a product that improves the reliability significantly through the integration using EPLD. In addition to this, it is designed to control the abnormal state of the board directly through the analysis of abnormal state of the sensor and the safety diagnosis function.

LD01 is used as a Stop Sensor

Xem thêm Thu gọn

GỌI TƯ VẤN

Liên hệ: 0393.665.382

THÔNG TIN SẢN PHẨM

Common feature

Service life of IR LED is significantly extended
High speed scan time
High sensor recognition distance
Watchdog function
Self-diagnosis function to determine whether the sensor is operating properly
LA01 Model : Sensitivity adjustment function using dip switch
LD01 Model : Use the Branch function to orient the sensor orientation

LA01 Model

CLASSIFICATION	ITEMS	DETAIL
Input part	Sensor check mode	Selected by a Dip Switch, Signal name : S.CH
	Branch selection mode	Selected by a Dip Switch, Signal name : B.EN (no function)
	Sensor sensitivity adjustment	Selected by a Dip Switch, Signal name : BRI
	D/A polarity selection	Selected by a Dip Switch, signal name : POL
Output part	S.Good	Photo-Coupler circuit (+12V, Open Collector)
	Gate On	Photo-Coupler circuit (+12V, Open Collector)
	D/A output	±6.7V ±5% (max. output voltage ±8V)
Function	Sensor type	IR LED, 16EA
	Disturbance light prevention	Frequency modulation method
	Scan Time	Approx. 6ms
	Self-diagnosis	Detects if IR LED and light receiving element are being operated properly
	Safety function	Micom maloperation prevention function by Watchdog
	Connection	30 Pin Flat Cable, within 3m
Environment	Storage environment	Storage temperature : -30 ~ 70 Storage humidity : 5~95 RH (however, no condensation is allowed)
Environment	Operation environment	Operation temperature : 0 ~ 50 Operation humidity : 35 ~ 85 RH (however, no condensation is allowed) Disturbance light : Less than 10000Lx Vibration : Less than 4~150 Hz, 4.9 m/𝑠2
Power	Input voltage	DC ±12V, ±10%
Power	Current consumption	+12V : 200mA, -12V : 40mA
Detection distance		For 20 mm of fixed height : 0 ~ 40mm For 30 mm of fixed height : 20~55nmm
Detection angle		-3 ~ +3˚
Detecting object		Reflection Tape, width 50mm
Dimension(W x H x D)		185 x 92 x 26mm
Weight		Approx. 410g

LE01 Model

>CLASSIFICATION	ITEMS	CONTENTS
Display and Output	Power LED	+12V input status display
	BR0, BR1	Displaying the Operational Status of the Branch Input Signal
	ON Rail	A photo-coupler output circuit (+12V), an output is turned off when derailed or when a sensor abnormality (an abnormal operation caused by a wa-wave light) is detected by a sensor.
	D/A	+1.1V ~ +8.7V, ±5%
Function	Sensor type	IR LED, 16EA
	Disturbance light prevention	Frequency modulation method
	Scan Time	Approx. 6ms
	Self-diagnosis	Detects if IR LED and light receiving element are being operated properly
	Safety function	Micom maloperation prevention function by Watchdog
	Connector	Molex, 5557-06, 20cm
Environment	Storage environment	Storage temperature : -25 ~ 70℃ Storage humidity : 5~95 RH (however, no condensation is allowed)
Environment	Operation environment	Operation temperature : 0 ~ 50℃ Operation humidity : 35 ~ 85 RH (however, no condensation is allowed) Disturbance light : Less than 10000Lx Vibration : Less than 4~150 Hz, 4.9 m/𝑠2
Power	Input voltage	DC ±12V, ±10%
Power	Current	250mA
Detection distance		22 ~ 58mm
Detection angle		-3 ~ +3˚
Detecting object		Reflection Tape, width 50mm
Dimension(W x H x D)		155 x 80 x 26mm
Weight		Approx. 410g

LD01 Model

CLASSIFICATION	DETAILED ITEMS	CONTENTS
Output	Operating LED	LED for output status indication
Output	Sensor output	Open Collector Type Output drive current: up to 50 mA Output leakage current: up to 50uA/24V Output voltage drop: up to 0.2 V / 50 mA
Function	Sensor Type	IR LED, 1EA
	Disturbance light prevention	Frequency modulation method
	Scan Time	Approx. 6ms
	Connection	JST 3pin connector, HRP-03-S
Environment	Storage environment	Storage temperature: -25 ~ 70°C Storage humidity: 5 ~ 95 %RH (however, no condensation is allowed)
Environment	Operation environment	Operation temperature: 0 ~ 50°C Operation humidity:35~85 %RH (however, no condensation is allowed) Disturbance light : Less than 10000Lx Vibration : Less than4~150 Hz, 4.9m/s2
Power	Input voltage	DC 12~30V, ±10%
Power	Current consumption	Less than 20mA
Detection distance		10 ~ 55mm
Detection angle		-3 ~ +3°
Detecting object		Guide Tape, Width not less than 20mm
Dimension (W’H’D)		40’33.3’14.1mm(Except connector
Weight		Approx. 40g