0393.665.382
info@sebongvina.com

Camera Trigger

Camera Trigger receives the encoder signal as input, creates a Pulse signal at a certain Counting period, converts it into various types of signals, and outputs a basic 8-channel Trigger signal, depending on each type of signal type of signal.

Xem thêmThu gọn
GỌI TƯ VẤN
YÊU CẦU BÁO GIÁ

Camera Trigger

    Liên hệ: 0393.665.382

    THÔNG TIN SẢN PHẨM

    • Number of trigger output signal channels : 8 (expandable)
    • Input/output signal types : TTL, Photo Coupler, Line Driver
    • Configuring and controlling operating modes through serial communication (RS-232C) connections
    • Internal clock generator can be used instead of encoder input
    • Parallel logic design using FPGA enables independent configuration of each channel
    • Trigger output signal polarity and pulse width setting function
    • Provides parameter storage using EEPROM
    • Output control using external digital input signals : counter reset, output signal activation/deactivation
    GROUP ITEM DETAILS
    Encoder
    In/Out    		 Input signal Line Drive input: A+, A-, B+, B-, Z+, Z-
    (100 Ohm Differential Termination,
    Receiver Input Voltage: ±25V)
    5V TTL input: A, B, Z
    Option : PHOTO input A, B, Z
    Number of input
    channels    		 1 channel (Option expansion 1 channel)
    Input frequency Maximum 8 MHz (Multiplied by 4)
    Filtering input signal Digital Delay Filter
    Counter 32 bit (0~4294967295)
    Output signal Line Drive output: A+, A-, B+, B-, Z+, Z-
    Number of output
    Channels    		 1 channel
    Output frequency Maximum 8MHz
    Trigger
    Out    		 Type and number of
    output signal    		 5V TTL: 8
    PHOTO, Open Collector: 8
    Line Drive: 8
    (100 Ohm Differential Termination,
    Driver Output Voltage: -7.5 ~ +10V)
    Support for 8 output
    ports    		 Possible to individually operate
    Indicator Power Red LED in normal state
    Error Yellow LED in abnormal state
    Status Flickering Green LED in normal state
    Communication RS-232C Max. 115.2Kbps (default value)
    Function Parameter setting, control command
    Environment Storage environment Temperature range: -25~70°C
    Humidity: 5~95% RH (However, there shall be no dew condensation)
    Operating environment Temperature range: 0~50°C
    Humidity: 35~85% RH (However, there shall be no dew condensation)
    Power Supply Input voltage DC 24V ±5%, 1A
    Dimensions(W x D x H) 125110. 445mm
    (Except connector extrusions)

    SẢN PHẨM CÙNG LOẠI

    Menu